I want to print some round objects.
I enclosed an example object. Although I use support material, the object curls so it is pushed off from the bed.
I work with PLA, 190grdn nozzle / 60grdn bed
Lower temperature, it will not stick to the bed.
Does anyone have expertise in these kind of objects?
I'm printing your object to see if I run into the same issue, My guess is your bed isn't high enough, your nozzle needs to be closer to the bed in order to stick.
You can also get rid of the paper
You can look at my videos to see how on You tube
This is your STL file, it printed correctly on my Leapfrog.
Just adjust your bed height.
PLA at 40 degrees heated bed
ABS at 90 degrees heated bed
Another option would be to use a RAFT. Make sure you choose 100% infill for it.
I will try with 40 degrees. The nozzle is very close to the bed, I lift by -0.30mm up
I did try a RAFT, this should solve the problem. But the raft is ripped off by the print head, to close. I didn't try a raft with 100% infill.
when you do use a Raft please make sure the bed is not very close.
OK, I try to print the object with a raft, with one closed layer, this works.In otherwords, I can print the raft...
The object itself, is even curled off from the raft.
I tried this with a bed temperature of 40 degrees, this helps a little.
Notice, I'm using woodglue and water for the stickyness.
Using 40 degrees without a raft isn't working, the shaft is curled from the bed.
How solid should you make the object?
My results are shown in the photo, attached to this message.
So not succesfull unfortunately. Can someone send me a gcode or all setting for the Simply3D software? Then I can try this on my machine. Perhaps it's a simple setting I over looked...
Try this one. Is for PLA, right extruder. Make sure the bed is heated to 60 C before you start the print.
Your problem isn't The software, your problem is your using wood glue and water, can I ask you who suggested you use wood glue and water, this will never work.
Go back to using the paper or use my new method, Aqua net hair spray.
I agree with Pedro on this one. A mixture from wood glue with water is much worse than a sticker.
The T1-PLA_UP.gcode you provided did work nicely on the machine.
De big difference is the positioning of the object. vertical gives a good result.
Leapfroq it self (headquarters in Alphen) gave me the tip to use wood glue and water. I also have much better results with this mixture than the sticker. Hairspray makes the machine in time dirty.
The following 3 clips will guide you through the installation process of your CreatrXL. By following these, you will be printing within 30 minutes. First start with unpacking the printer. Clickhere to see how you correctly pick up the printer
In this clip, you will be guided through the unpacking of a brand new CreatrXL. The unboxing along with the location of tie wraps which need to be removed are shown, as well as the process of a connecting the cables to the printer and computer.
In this clip, we will show you how to install the required software. The first step is to download and install the Arduino software to make it possible for your computer to connect with the printer. The next step is to download and install the Repetier Host Leapfrog software or that controlls your 3D printer. We have tried to make this as simple as possible and also provided direct downloading links per operating system.
SIMPLIFY 3D SOFTWARE
If you are using the new Simplify 3D software you can follow all the steps except for the Repetier-Host Leapfrog installation and using explanation. Simply download the software via the purchase link and before first use a pop-up will appear showing you the Simplify 3D Quick start guide. You can also download the Quick start guide or access it from the software via help –> Quick start guide. The quick start guide will briefly explain the functions of the software so that you can start your first print.
Please select you operating system and follow the descriptions in the movie.
The first step is to download and install the Arduino software to make it possible for your computer to connect with the printer. The next step is to download and install the newest version of the Repetier Host Leapfrog software as shown in the clip. This software allows you to convert your 3D software file [STL for example] to a printable file [G-Code] and allows you to control your printer. The Repetier Host Leapfrog software contains standard CreatrXL Print Profiles. Just select the extruder, the filament material as well as the color and Repetier will automatically select the ideal print temperature providing you the best print quality possible. There is also a Leapfrog support button implemented in the software. A Mac version will be available soon.
If you have followed the installation procedure, but you can’t control your Leapfrog CreatrXL and the “6 commands waiting” message in Repetier-Host Leapfrog won’t disappear, you have to install the 2.8.28 drivers. Please see Solution can’t connect 6 commands waiting in Repetier-Host Leapfrog how to do so.
For a more thorough description of Slic3s settings please check this guide!
To install the Arduino drivers on a computer with Windows 8 follow these steps after downloading the Arduino software.
- Save unsaved work and write the instructions down
[your computer will reboot into startup options screen]
- Press the Windows Key and the ‘R’ key simultaneously
- Copy the command inside the brackets
–>[ shutdown.exe /r /o /f /t 00 ] – Select ‘Troubleshoot’
- Select ‘Advanced options’
- Select ‘Startup Settings’
- Select ‘Disable Driver Signature Enforcement’
- Install driver as usual via device manager
In this clip, we will explain you how you can generate a STL file using Sketchup. We show you what to download and how to export your design in STL.
In this final clip, the process of creating your first print will be explained. This starts with removing the callibration print that is already on the print bed. How to insert the filament and operate the Repetier Host Leapfrog software is also shown, which should culminate in your first 3D Print on the CreatrXL!
The first step is to download and install the Arduino software to make it possible for your computer to connect with the printer. You will then need to in stall this driver for OSX to recognize the hardware.
The next step is to download the Repetier software as shown in the clip. This software allows you to convert your 3D software file [STL for example] to a printable file [G-Code] and allows you to control your printer. We have developed standard print profiles for the CreatrXL. Please follow the instructions below to install the print profiles for Mac [not yet included in the video]:
- Download This file
- Go to your Home Folder on Mac and select “Go to Folder” from the Go Menu en type “Library/Application Support/Slic3r/” - Unzip the file you just downloaded and dump the contents in the Slic3r folder, it will replace your existing settings. If you want to keep your current settings as well, take the contents from each folder and put this in the same folder in the Home/Libaray/App../Slic3r folder.
Download instructions by Deepak Dinesh Mehta For a more thorough description of Slic3s settings please check this guide!
Please request a firmware download via the Ticket System